elastic limit

英 [ɪˈlæstɪk ˈlɪmɪt] 美 [ɪˈlæstɪk ˈlɪmɪt]

弹性极限;弹性限度

化学经济



双语例句

  1. Crushing strength at elastic limit Research of Elastic Modulus of Mould Pressing Bamboo Processing Fragment Plate
    弹性极限的抗压强度竹加工碎料模压代木板材的弹性模量研究
  2. E.When a material is stressed beyond the elastic limit a permanent deformation results.
    当一种材料的应力超过弹性极限时,就会产生永久变形。
  3. Objective To investigate the elastic limit and relevant enclasp force of the non-precious metal casting clasp.
    目的研究非贵金属铸造卡环的弹性极限及其相应卡抱力。
  4. And then, when you keep adding force which we will do by gravity,-we will just hang weights on it then it starts to bend over, up to a point here which we call the elastic limit.
    然后,继续增加力-,受到重力的影响,不断给它悬挂重量-,然后它开始弯折,到这里的某一点,我们称之为弹性极限。
  5. The aim is to obtain a high yield strength, elastic limit and high toughness.
    其目的是获得高的屈服强度,弹性极限和较高的韧性。
  6. Elastic limit, Yeung's module of elasticity to yield point
    弹性限度、阳氏弹性系数及屈服点
  7. The side-rolling resistant torsion bar made of this steel exhibits high fatigue life span and elastic limit.
    采用该材料制造的抗侧滚扭杆具有高的疲劳寿命和高的弹性极限。
  8. The Elastic Limit and the Relevant Enclasp Force of Non-Precious Metal Wrought Wire Clasp Analysis of Organometallic Compounds(ⅵ)& Reversed-Phase High Performance Liquid Chromatography of Polar and Nonpolar Ferrocene Compounds
    非贵金属缎造卡环弹性极限及其相应卡抱力金属有机化合物的分析(Ⅵ)&极性与非极性二茂铁化合物的高效液相色谱研究
  9. Crushing strength at elastic limit The Conflict of Attack and Defence System Between TBM and ATBM
    弹性极限的抗压强度地地弹道导弹武器系统攻防体系对抗
  10. The outer tensile stresses can be so large that they exceed the elastic limit in tension perpendicular to grain and a permanent set takes place.
    当外层的拉应力大到超过横纹抗拉弹性极限时,就会产生永久变形。
  11. Stresses beyond the elastic limit
    超过弹性极限的应力
  12. Conclusion Within the elastic limit of the material, the relation between the retention of gold alloy clasp and the depth of abutment undercut showed positive correlation.
    结论在卡环弹性极限内,金合金卡环固位力与卡环臂进入基牙倒凹的深度成正比。
  13. The strain of a vegetation system can be rehabilitated by the ability of self-organization at the light disturbance which is under the elastic limit.
    在弹性极限以下的轻度干扰,植被系统受力后产生的应变可以通过植被本身的自组织能力得以自我修复;
  14. The experimental results shown that the elastic limit stress, the Yang's modulus and the brittleness of SFRC were increasing when the temperature decrease.
    试验结果表明随着温度的下降,材料的极限强度提高,杨氏模量上升,脆性加大。
  15. Lacking stiffness and giving way to pressure. elastic limit, Yeung's module of elasticity to yield point
    缺少硬度而且容易向压力屈服。弹性限度、阳氏弹性系数及屈服点
  16. Shakedown analysis is a method which can be used to research the elastoplastic behavior of a structure under variable repeated loads that exceed the structure ′ s elastic limit load.
    自适应分析研究超出弹性极限的重复载荷作用下结构的弹塑性行为。
  17. Crushing strength at elastic limit
    弹性极限的抗压强度
  18. Torsion deformation is the biggest effect factor on elastic limit equivalent stress.
    扭转变形是对钢丝的弹性极限等效应力情况影响最大的因素。
  19. By agreement, a practical approximation of the elastic limit, called the offset yield strength, is used.
    因此我们定义了一个实际存在的,弹性极限的近似值,称为残余变形屈服强度。
  20. The spall properties of no-Co-alloy steel loaded by gas gun are studied, and Hugoniot elastic limit, spall strength, spall thickness and plastic strain rate are obtained from each experiment.
    利用一级轻气炮作为加载手段,对无钴合金钢的层裂特性进行了研究,获得了Hugoniot弹性极限、层裂强度、层裂片厚度以及塑性应变率等动力学参数。
  21. The calculation formulas for curve type or broken line type of bent tube rebound are put forward on the basis of constant force field and elastic limit rebound theory.
    依据恒力场理论和弹性极限回弹理论,提出了曲线型或折线型的计算公式。
  22. The larger the A, the greater the difference between the compressive strength f c and elastic limit stress;
    A越大,材料抗压强度fc与弹性极限应力的差值越大;
  23. Elasto-plastic finite element analysis based on the proposed constitutive equation and the Yu unified strength is also performed to study the influence of compressibility of pore fluid on the elastic limit load and load deformation relation of an example structure.
    最后,采用俞茂宏统一强度理论,针对一个具体的结构例子,分析了孔隙液体的可压缩性对结构弹塑性分析的影响。
  24. Elastic Limit Stress Theory for Materials
    材料的弹性极限应力理论
  25. The "secant modulus method" for solving the problem of medium flexibility stability is presented, and the formula given may be used directly for calculating the critical stress of the medium flexibility reinforced concrete members, of which the concrete itself is already beyond its elastic limit.
    文中提出了用割线模量法来计算中柔度稳定问题,并给出了计算钢筋混凝土在弹性极限外的中柔度受压构件的临界应力。
  26. Materials or components often subject to repeated loads during service, though the stress levels does not exceed the strength limit materials, destroy may take place even under the elastic limit, namely, fatigue failure occurs.
    材料或构件在使用过程中,常受到多次重复变化的载荷作用,应力水平虽然没有超过材料的强度极限,甚至比弹性极限还低的情况下就可能发生破坏,即材料发生了疲劳破坏。
  27. Finally, the adjustment factor to be elastoplastic theory of the formula will be obtained, by the plastic limit load and elastic limit load ( small deflection theory of the results of thin plate) ratio determined, and has set out the elastoplastic adjustment factor computation table.
    最终,得到弹塑性调整系数的理论公式,由所求得的塑性极限荷载与弹性极限荷载(薄板小挠度理论的结果)的比值来确定,并列出了弹塑性调整系数计算表。
  28. In this process, although the whole stress is far below the elastic limit, the local stress of the gaps can exceed the yield limit due to the stress concentration.
    在这个过程中,虽然整体应力远低于弹性极限,但是由于应力集中,在杂质和缺口处的局部应力也可以超过屈服极限。
  29. Study shows that heat treatments and preloading have less influence on elastic modulus of the composites, of which the tensile elastic limit can be improve by them.
    热处理和预压处理对复合材料的弹性模量影响很小,但可以提高复合材料的弹性极限。